eWillys | Your source for Jeep and Willys deals, mods and more (2024)

UPDATE: **SOLD** Was $550.

Seems like a reasonable price.

“Very rare 1947 Sears and Roebuck trailer. Perfect for Jeep owners or anyone with a small truck or car that needs more hauling capacity. Has Ford truck/Jeep lug pattern so you can put matching rims on it. Has drop downs like a commissary trailer. Bed is 46″ wide x 6′ long x 12″ high (inside measurements) and has a tailgate. Prior owners bought it in 1963 and used it for camping by putting side boards and a canvas tarp over it (support rods included). Comes with a new trailer light/wiring kit. Has heavy duty fenders that just need to be bolted back on. Has some rust but usable as is or do a full restoration. I was going to treat it Por15 rust stop and then plastic bed line it but figured I’d go ahead and sell it as is and let the new owner decide how to restore it. I have too many projects to mess with it right now. Permanent plates included. Come take a look and make an offer. ”

UPDATE: **SOLD** Was $850.

It’s a project.

“CJ2A WILLYS jeep. Part out or rebuild. RAT ROD potential as it has an aluminum 215Ci Buick V8, four barrel manifold, mated to the jeep transmission and transfer case, axles and springs complete rolling chassis. Steering is intact. ID tags are on firewall but no title. Great even patina. No trades.”

UPDATE: **SOLD** Was $6000.

(07/04/2016) Looks like a custom hood.

“1948 Jeep with an 83 Buick V6. Body is in great condition. 4 ton winch on the front. Removable top”

I was supposed to report on our trip, meeting Lloyd, and seeing Robin’s collection (and stopping by Montana Wheat). However, once again, I’m am exhausted from a long day of driving. The good news is that we made it back to Pasco and I completed some updates. 🙂

On Wednesday we have one more day of driving. We’ll be heading back to Seattle, to Auburn, to Yelm, and then back to Pasco. But, Ann will be doing some of the driving, so I’ll get the story of our trip up, finally.

UPDATE: I’ve added engine photos to the bottom of the post.

Rusty was owned and driven (apparently very roughly) on a farm near Billings, Montana. There are numerous welds, necessaryto fixthe cracks that appeared. The hubcaps have all kinds of dents, as does the body, the grille, hood, and the fenders. No part seemed spared. According to Lloyd, the man we bought it from, he purchased at an estate sale. The fact was, the farmer who owned it refused to sell it while alive, so Lloyd had to wait until he died. Lloyd was told it ran until it was parked and that it was parkeddue to the man becoming unable to drive it. At least, that’s the story. Still, the engine spins, the tranny shifts, and the jeep rolls easily.

Glenn tells me this was manufactured in late 1955 and made available for sale in 1956. I believe the color is pine tint, not far from the sea foam green color I’dintended to paint Biscuit (before I receive the wrong color from the paint company, but that’s another story).

Here are more than thirty photos that show the good, bad, ugly. What I can’t photograph is the smell emanating from the seats. lol.

Continue reading →

UPDATE: **SOLD** Was $4500.

Could be worth a look.

“1957 Willys CJ3B This is a original CJ3B Roll bar not original equipment
New Walcks wiring harness, New Brakes and brake cylinders, Tires. Seats recovered on original seat springs and frame. Floor pan and hat channels are solid. minor rust on R 1/4 panel. This jeep runs and drive great. Odometer is showing 40000 ish. From what I can tell mostly original paint. This jeep is drivable now or great for a restoration”

UPDATE: **SOLD** Was $3000.

Runs and drives.

“1947 Willys Jeep CJ2A. Lots of extra parts, some fit, some unsure of. Excellent hunting rig. Have not registered for on road use since 1993 but have used every year for hunting. Price is relatively firm as I don’t need to sell.”

Looks like a great price.

“1947 Willy’s Jeep. complete Jeep 4 cylinder flat head,good body, floors and bed good. Has not been started for a year or so. Frame needs welded.no title. For parts or would make a good off road project. any questions please call. ”

http://cincinnati.craigslist.org/cto/5769340136.html

This looks like a good price.

“For Sale 1952 Willys M38A-1 Jeep. Asking $5,500, but am willing to negotiate. ”

http://billings.craigslist.org/cto/5767214377.html

UPDATE: **SOLD** Was $14,000.

Includes a hand crank and a capstan.

“1942 Ford GPW Runs and Drive very nice. has most of canvas, No top. The Tub is a Ford Script Replacement Tub. Combat wheels rifle rack, Jack and Ax. Also has hand crank. Completely rewired. Also has Capstan winch in complete working order. Additional photos on request.
Very fun to drive, Great for parades or???”

UPDATE:Price dropped to $13,500.

(06/16/2016) It’s a 28684 w/o indents or column shift.

“Recent frame-off restoration to near stock. Several options added; shaft-driven front winch, over-drive, rear PTO, rear seat, wheel house pads and Birchwood Canvas custom summer top. Engine (by Wagamon Bros), tranny, transfer case rebuilt. All the dash gauges work and also estop and lights. Six volt starts every time. New floors, original body and fenders from South Dakota. New gas tank and fuel lines. All new drum brakes, shoes and brake lines. Floor mats in front and cargo mat in the rear. All new seat coverings and cushions to match the top. Installed hardened valve seats for use with modern unleaded fuels with no problem. Painted a stock bright Stock Harvard Red. Replacement cloth wiring harness used to keep it authentic. This vehicle causes many conversations, everybody loves an old jeep.”

http://minneapolis.craigslist.org/wsh/cto/5766991520.html

This jeep is being sold on consignment. No description provided. You can see thecontact link here:
http://www.shoedersmarine.com/default.asp?page=xInventoryDetail&id=2202175&source=craigslist

It runs, but need some work.

“For sale is a 1948 Willys Jeep. It has a Dauntless V6 engine in it and it runs. It includes hard top, doors, back hatch and many extras. It was a project, and needs some additional work, but as mentioned it is currently a running Jeep.”

http://albuquerque.craigslist.org/cto/5764509857.html

The FJ might be the best deal of the bunch.

“1946 Willy’s Jeep (has title) Not sure if it will run. Was parked 6 years ago. $2000.00 or/Best Offer

1956 Military Jeep – will run – no title $600.00 or/Best Offer

1975 Toyota Land Cruiser – Rebuilt motor, Runs good, Rusty (no title) $1200.00 Or/Best Offer

Will Trade one or all for … Gas Pumps – Signs – Large Tool Boxes – 8 Ft. Metal Brake – Old Trucks – Old Cars – Rat Rods ….”

http://masoncity.craigslist.org/cto/5767693880.html

Seller describes it as a project, but doesn’t indicate what it needs.

“Selling my Willys jeep project, need the space. Have the windshield and roll bar. Asking $4,000 but please make an offer. Thanks”

http://monterey.craigslist.org/cto/5767084021.html

Those tires extend outward quite a ways. I wonder if it has later model axles?

“48 Willys
Brand new remanufactured Dauntless V-6 engine
High/low transmission
4×4 system all works great
New clutch
New brake cylinders
New clutch slave cylinder
Rebuilt carburetor
Transfer case and transmission have been removed and inspected
Clear title
Asking $6,000 or best offer”

http://rmn.craigslist.org/cto/5769377505.html

UPDATE: **SOLD** Was $2500.

DJ-3A/CJ parts mix.

“1953 Willys dj3a very little rust. Needs rims and tires, seats and the wiring needs to be finished up. Will make a great project. Needs a very short list to be on the road. New brake master cylinder, so brakes will work. Just need to be bled. Motor runs, all the gears shift smoothly, and 4wd works. ”

UPDATE:**SOLD** Was $1100

(08/24/2016) Looks like a good price on a CJ-6 w/ a Meyer half cab.

“Has Meyers half cab.
Tires are in great shape.
Same as a CJ5 with 20″ extention.
Good project but I don’t have time to build it.
Motor runs but smokes bad.
No transmission or transfer case.
Have Washington title in my name.”

UPDATE: **SOLD** Was$10,500.

“1951 WILLYS PICKUP HOT ROD 350CI CHOPPED AND CHANNELED 3″ S10 FRAME
ALL RUNNING GEAR NEW/REBUILT OR GOOD – NO JUNK
CLEAN TITLE/TABS”

Appears in fair shape.

“Offered is an original WWII U.S. Army Jeep Combat Wheel Rim. Cash only. Reasonable offers considered.”

http://detroit.craigslist.org/wyn/wto/5761326842.html

UPDATE:Still Available.

(05/26/2016) Has fiberglass body. Needs work.

“Fiberglass body, needs breaks, wheel bearings and a good tune up”

http://maine.craigslist.org/cto/5766225820.html

UPDATE: **SOLD** Was $950.

A project.

“Cj2a jeep not running. The body is good engine all there needs someone to work on it. These are simple machines with any part available on line.”

Might havesome value.

“I have a m38 project. Someone has swapped in a f head into it. The grille is in the tub for the jeep. I do have a title. I have never tired to start it.”

http://topeka.craigslist.org/pts/5757071150.html

UPDATE: Still Available.

(08/03/2016) Appears solid.

“Willys 1950 CJ3A 134 L motor, locking hubs, foot started, solid tub, A-1 frame no rust, 12 volts, 6 volt started, 12-6 volt generator, registered and inspected, get in and go.”

http://nh.craigslist.org/cto/5769241900.html

07

We had a long but enjoyable day yesterday. We picked up the DJ-3A, #56337 10538. Naturally, it will needed more work than it showed, partly because whomever owned it before Lloyd beat the thing up. But, the engine spins, the column-shift transmission shifts. and it’s got plenty of original parts to make it work the trip.

We also had a great time viewing Lloyd’s creations, which I’ll feature on Wednesday, and had a great eveningwith Robin, who shared his collection of jeeps with us.